AGA 3 Orifice Meter Tubes
- Home
- AGA 3 Orifice Meter Tubes
AGA 3 Orifice Meter Tubes
Orifice meter tubes and meter runs fabricated in our Houston shop to AGA Report No. 3.
Orifice Meter Tubes Built to AGA Report No. 3
The Orifice meter is the long-standing workhorse of natural gas measurement, and its measurement depends as much on the meter tube as on the plate. AGA Report No. 3 sets out how that tube has to be built.
Fab Industries has been a Houston fabrication shop for the oil and gas industry for more than 40 years. Our qualified welders, machinists and assembly and test crews work under one roof in a 40,000-square-foot shop with overhead cranes from 10 to 50 tons, so the work is machined, welded, assembled and tested in-house before it ships.
AGA Report No. 3 in Brief
What it covers
AGA Report No. 3, Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids—Concentric, Square-edged Orifice Meters, is published jointly with API as MPMS Chapter 14.3. Part 1 gives the flow equations and uncertainty guidelines, Part 2 the specification and installation requirements, Part 3 natural gas applications, and Part 4 background and example calculations.
Part 2 and the meter tube
Part 2 defines the meter tube as the straight upstream pipe of the same diameter, including the flow conditioner if one is used, the Orifice plate holder, and the downstream pipe beyond the plate. It sets requirements for the tube’s internal diameter, roundness, surface roughness, cleanliness, the pressure taps, and the upstream and downstream straight lengths for each installation.
Why straight length matters
Valves, elbows and tees upstream of the plate distort the flow profile. AGA Report No. 3, Part 2 sets minimum straight lengths, which can be shortened by using a flow conditioner. The standard notes that installations not built to it may carry measurement bias from inadequate flow conditioning and straight pipe lengths.
Meter Tube or Meter Run?
Meter tube
The meter tube is the piping itself: the precision upstream and downstream sections matched to the bore, with the plate holder (Orifice fitting or Orifice flanges) and, where used, a flow conditioner.
Meter run
A meter run is the meter with the appropriate piping to satisfy the AGA standards, delivered ready to set and connect (plug and play). Fab sells both.
Orifice Meter Tubes from Fab
Every meter tube is built to your specification. We can supply:
- Meter tubes with single-chamber or dual-chamber Orifice fittings, or with Orifice flanges
- Upstream sections with or without a flow conditioner
- Pressure tap and instrument connections to your design
- Complete Orifice meter runs, alone or as part of a metering skid with flow computers and instrumentation
- Repair and refurbishment of existing meter tubes
Meter Runs for Other Technologies
Ultrasonic, Coriolis and Turbine
We also build meter runs for Ultrasonic meters (AGA Report No. 9, multipath Ultrasonic meters), Coriolis meters (AGA Report No. 11, which measure mass flow directly) and Turbine meters (AGA Report No. 7). See Meter Skids for a comparison of meter technologies.
What to Send Us
To quote a meter tube or meter run, it helps to have:
- Line size, pressure class and service
- Fitting or flange type and any flow conditioner requirement
- Your drawings or specification, including required straight lengths
- Quantities, timeline and ship-to location
For a quote, email sales@fabindustriesinc.com with your specifications or drawings, quantities, required dates and the ship-to location, or call 713-748-0799 (toll-free 800-227-6944). For anything else, email contactus@fabindustriesinc.com.
Planning a LACT Unit?
Request a quote, email sales@fabindustriesinc.com, or call 713-748-0799 or toll-free 800-227-6944. We provide 24-hour service to the Gulf Coast region.