Meter Tune-Up
- Home
- Meter Tune-Up
Meter Tune-Up
Meters taken apart, refreshed and returned to like-new working condition.
A Tune-Up Before a Small Problem Becomes a Big One
Orifice fittings work hard. Seals and gaskets age, grease dries out, and operating parts wear, until a plate change that used to be routine becomes difficult or a fitting starts to leak. A tune-up catches that wear early.
Fab Industries was founded in Houston in 1982 refurbishing Daniel Senior Orifice meters, and we have been taking meters apart and putting them back together ever since. Our qualified machinists and assembly and test crews do every tune-up in-house.
What a Tune-Up Includes
A tune-up returns the meter to like-new working condition. We:
- Take the meter apart completely
- Clean and inspect each part
- Replace the parts that need it, from our stock of meter parts from 2" to 12"
- Replace all gaskets, not just the ones that look worn
- Regrease the operating parts
- Reassemble the meter and check that it operates smoothly before it ships
What We Look At
Seals and gaskets
Every gasket is replaced on every tune-up. Seals and other soft parts are inspected and replaced as needed, so the fitting holds pressure and the plate seals properly.
Plate carrier and operating parts
On a dual-chamber fitting, the carrier, gears, shafts and slide valve have to move freely for the plate to be raised and lowered while the line stays in service. Worn or damaged parts are replaced, and the mechanism is regreased so the plate can be changed smoothly and safely.
Bore and sealing surfaces
We check the bore and sealing surfaces while the meter is apart. A tune-up is not a rebuild: if we find damage that needs weld overlay, machining or a full rebuild, we will tell you before doing more work. See Repairs.
Tune-Up, Repair or Upgrade?
- Tune-Up: the meter works but is due for service; parts, gaskets and grease bring it back to like-new working condition.
- Repair: something is damaged or failing and needs machining, welding or a rebuild. See Repairs.
- Recertification & Upgrade: an older meter needs to be checked against current AGA standards, and upgraded if it falls short. See Meter Recertification & Upgrades.
Not sure which you need? Send us the details and we will help you decide.
Backed by a Full Shop
Tune-ups are done in our 40,000-square-foot Houston shop, where the same welders, machinists and assembly and test crews who build new equipment can step in if a meter needs more than a tune-up. We provide 24-hour service to the Gulf Coast region, and we ship worldwide.
For a quote, email sales@fabindustriesinc.com with the meter make, size, pressure class and quantity, required dates and the ship-to location, or call 713-748-0799 (toll-free 800-227-6944). For anything else, email contactus@fabindustriesinc.com.
Planning a LACT Unit?
Request a quote, email sales@fabindustriesinc.com, or call 713-748-0799 or toll-free 800-227-6944. We provide 24-hour service to the Gulf Coast region.